2020 Ford Expedition Engine and Powertrain Torque
These 2020 Ford Expedition records describe engine or powertrain torque output. They are not bolt, wheel-nut or other tightening settings. Compare the engine, configuration and RPM conditions in each row.
What this page covers
Match your configuration
1 sourced record for 2020 Ford Expedition. This is the coverage held in our library, not a claim that every trim or market is included. The conditions and source apply to each individual row.
- Engine descriptions in the records
- See cited Ford configuration table
- Drivetrain descriptions
- See cited Ford configuration table
Engine and Powertrain Torque: source records
| Trim / configuration | Engine | Drivetrain | Torque | What the value describes | Conditions | Source evidence |
|---|---|---|---|---|---|---|
| Scope defined in row conditions | See cited Ford configuration table | See cited Ford configuration table | 150 lb-ft | Engine / powertrain output | Wheel lug nut torque for M14 x 1.5 fasteners; Ford also prints 204 Nm. Specification applies to nut and bolt threads free of dirt and rust. Retighten within 100 mi (160 km) after wheel disturbance. This is wheel-fastener torque, not engine torque. No trim, engine, axle ratio, package, model-year, or drivetrain alias was created. | 2020 Ford Expedition Owner's Manual, p. 384 · verified 2026-08-16 |
Read the differences in this table
This page contains 1 source record and 1 distinct value-and-scope combination. Repeated values can belong to different engines, trims or procedures. Equal numbers do not establish interchangeable configurations.
| What the value describes | Recorded value | Source records |
|---|---|---|
| Engine / powertrain output | 150 lb-ft | 1 |
Worked example: separating engine output from a tightening specification.
The counts describe this library, not market availability. Source page numbers are the labels stored with each record; PDF viewer page positions can differ from printed page numbers.
Using a torque record
First identify what the torque describes. Engine or system output, often accompanied by an RPM condition, is different from a fastener tightening requirement. The scope column reflects explicit wording in the stored source notes; an unspecified scope still needs the original document.
Keep the unit, thread condition and any additional procedure with the value. A numeric torque entry alone does not tell you whether an angle step, replacement fastener or another assembly instruction applies. Open the cited document before using it.
What the source date tells you
The verification date belongs to the stored record. It is not the vehicle’s build date or a guarantee that the document has not changed. The source link beside each row lets you check the document and page used for that entry. Different rows may cite different documents.
Follow a worked example of matching a specification · Browse other covered model years
Missing or conflicting information?
Do not fill an empty field with a neighboring row’s value. A missing record is a coverage gap. Send the page address, model year, configuration and the conflicting source page through Contact SpecAxle so the record can be checked.
Frequently asked questions
What is the 2020 Ford Expedition torque specifications?
These 2020 Ford Expedition records describe engine or powertrain torque output. They are not bolt, wheel-nut or other tightening settings. Compare the engine, configuration and RPM conditions in each row.
Where does this specification data come from?
The table is tied to 2020 Ford Expedition Owner's Manual, published by Ford Motor Company, and was last verified on 2026-08-16.